Product Details:
| Brand | Wika |
| Model | 213.53.100, lowe mount |
| Design | EN 837-1 |
| Nominal Size | 50, 63, 100mm |
| Accuracy Class | NS 50, 6316, NS 1001.0 |
| Ambient Temperature | -20 to +60degC |
| Medium Temperature | +60deg C maximum |
- For measuring points with high dynamic pressure loads and vibrations
- For gaseous and liquid media that are not highly viscous or crystallising and will not attack copper alloy parts
- Hydraulics
- Compressors, shipbuilding
Special features:
- Vibration and shock-resistant
- Especially robust design
- Type approval for the shipbuilding industry
- Scale ranges up to 0 ... 1,000 bar
Description:
The liquid-filled model 213.53 Bourdon tube pressure gauge is constructed with a case from stainless steel and wetted parts from copper alloy.The model 213.53 meets the requirements of the internati-onal industry standard EN 837-1 for Bourdon tube pressure gauges.Due to the liquid filling in the case, the pressure element and movement are efficiently damped. Therefore, these instru-ments are particularly suited to measuring points with high dynamic loads, such as fast load cycles or vibrations.
The cases of the model 213.53 are available in nominal sizes of 50, 63 and 100 mm and fulfil IP65 ingress protection. With an accuracy of up to class 1.0, this pressure gauge is suitab-le for a wide range of applications in industry.For mounting in control panels, the pressure gauges with a back mount process connection can be fitted with a mounting flange or with a triangular bezel and mounting bracket.
Pressure limitation
- NS 50, 63: Steady: 3/4 x full scale value
- Fluctuating: 2/3 x full scale value
- Short time: Full scale value
- NS 100: Steady: Full scale value
- Fluctuating: 0.9 x full scale value
- Short time: 1.3 x full scale value
Temperature effectWhen the temperature of the measuring system deviates from the reference temperature (+20 °C): max. ±0.4 %/10 K of the span
Ingress protection per IEC/EN 60529IP65
Process connection
- Copper alloy
- Lower mount or back mount
- NS 50, 63: G ¼ B (male), SW 14
- NS 100:G ½ B (male), SW 22
Pressure element
- NS 50:
- Copper alloy, C-type or helical type
- NS 63:
- ≤ 400 bar: Copper alloy, C-type or helical type
- > 400 bar: ≥ 400 bar: Stainless steel 316L, helical type
- NS 100:
- < 100 bar: Copper alloy, C-type
- ≥ 100 bar: Stainless steel 316L, helical type
Movement
Dial
- NS 50, 63:Plastic ABS, white, with pointer stop pin
- NS 100:Aluminium, white, black lettering
Pointer
- NS 50, 63:Plastic, black
- NS 100:Aluminium, black
Case
- Stainless steel, natural finish
- Sealing towards process connection with O-ring
- With all scale ranges, the filling plug can be vented for internal pressure compensation.
- Position of blow-out device
- NS 50:Case back, at 12 o‘clock
- NS 63, 100:Case circumference, at 12 o‘clock
Window
Ring
- Crimped triangular bezel, stainless steel, glossy finish
Filling liquid
Options
- Other process connection
- Sealings (model 910.17, see data sheet AC 09.08)
- Measuring system and movement from stainless steel
- (model 233.53)
- NS 100: Zero point adjustment (in front)
- Increased medium temperature with special soft solder
- - NS 50, 63: 100 °C
- - NS 100: 150 °C
